![]() ![]() But the windows recovery disc might be able to fix/restore the MBR. I don’t think it will boot because it’s just copying the partition and not the MBR or disk boot information. Just in case.Ī bit late but maybe someone else has same question. You might want to practice this on a non-critical machine before you do so on mission critical hardware. Using Gparted to copy partitions from one drive to another is a great way to rescue a working system from a dying one. It's not the most elegant solution, but it works and works extremely well. Make sure you leave yourself plenty of time as this can be a lot of data to copy. ![]() Once you have done that, there is no going back - your partitions will be copied. Of course the action isn't finalized until you have clicked the Apply button. Once you are done, click the Paste button and the partition will be pasted. If this partition is going to be then copied to another machine, you really don't need to worry about resizing - so long as it will fit in the unallocated space. I could shrink that partition to make room for something else on that drive (should I need to). When you click the Paste button (or menu entry) a new window will open that wants you to define how much of the unallocated space to use (see Figure 3).Īs you can see, in my example, there is plenty of unused space on the partition being copied. You can also right-click the selected space and choose Paste from that menu. Select that unallocated space and then click the Paste button. If you do not, you will have to make room by resizing the existing partition. With this drive selected you should see plenty of unallocated space (see Figure 2). Now click the drive drop-down and select your second drive (this will be the external drive attached to the machine). ![]() You can also right-click the selected partition and select Paste from that menu. From that drive select that partition that will serve as the source and click the Copy button. As you can see there is a 144.42 Gb partition to copy. When you fire up Gparted you will see your first drive listed (see Figure 1). Normally Gparted need to be run with root privileges, but since you are using a live cd you won't need this. When you fire up your live cd you will need to open up a terminal window and issue the command gparted to use the tool. ![]() And this space needs to have enough unused space on it to accommodate the partition to be copied. You will also need to have an external drive attached with equal or more space than the source partition. With this live CD you can boot up and then run Gparted on the drive in question without any problems. Instead you have to use a live CD with Gparted included, such as SystemRescueCD. So if that partition is on a working system, and you need that partition mounted for the system to be working, you can not just install Gparted and have at it. First and foremost the ONLY way you can copy and paste a partition is if that partition is not mounted. In this article I will walk you through the process of copying a partition from one drive to another with the help of Gparted.īefore you get too involved with this process there are a couple of things you will need to know. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |